Build a plate that actually fits.

Mix switch, outlet, decorator, data and blank openings across as many as 10 gangs. Measure the real hardware, tune every hole, add face art, then export one print-ready multicolor 3MF.

Choose a ready-made one-gang layout, then adjust anything below.

Each preset loads a black plate with a white flush-inlaid logo and editable “FUEL” text.

Gang count

Corner radius

Overall width

Overall height

Plate thickness

Plate filament color

Also shown as Plate in Filament colors.

Choose a gang to edit

Opening

Opening vertical shift

Preset sizes are starting points—not a promise of fit. Calipers beat guesswork.

Print orientationFace-up makes raised, shiny top art.

Layout for selected gang

Hole diameter

Vertical spacing

Horizontal shift

Vertical shift

Each gang keeps its own screw layout, diameter, spacing and X/Y offsets. Export the paper-fit SVG before a long print.

Milwaukee® logo is a trademark of Milwaukee Tool. Intended for personal, non-commercial use.

Milwaukee

Logo width

X position

Y position

Rotation

Filament slot

Set this slot’s color in Filament colors.

Automatic cutout: drag the logo anywhere. Plate edges, switch openings, and screw holes trim it automatically in preview and export.

Color & text themes

Text or symbols

Automatic cutout: openings and screw holes always punch through artwork. You can run text or a logo across a switch opening—the exported 3MF trims away only the unsupported middle.

Font style — 60+ choices

Text height

Y position

X position

Rotation

Filament slot

Text always uses this slot’s color.

Type to update the most recent text—even while the logo is selected. Add another text layer when you want a second name or line, then drag either one on the plate. Rotate to 90° for either side. Symbols and unusual characters depend on the selected font.

Tap a shape to add it. Add as many as you want; drag each one directly on the plate.

Selected size

X position

Y position

Rotation

Filament slot

Convert a logo or text picture to one-color art

Dark cutoff

Picture size

Filament slot

X position

Y position

Rotation

Best results: a high-contrast logo on a plain light background. The file stays in this browser session.

Draw directly on the plate

Stroke width

Filament slot

Select a layer here or tap it on the plate. Drag to move; use the controls above to resize or rotate. Press Delete to remove the selected layer.

These five swatches are the color source for the preview and exported 3MF. Assign each artwork layer to Color 1–4.

Plate

Color 1

Color 2

Color 3

Color 4

Raised art height

Adds raised detail above the plate face.

Top view

Editing gang 1

1gangs

23MF objects

3.8 mmfinished thickness

1:1SVG scale

3MF check ready. Download runs the manifold, alignment, color, and face-coverage checks before saving.

Measure before you print

Wall plates and device yokes vary by region, age and manufacturer. Remove the old plate, measure the opening and screw centers with calipers, and print the 1:1 SVG on paper at 100% scale first.

Cleaner multicolor faces

Open the recommended 3MF in Bambu Studio or OrcaSlicer; the plate and artwork arrive assembled as separate, named objects with filament colors assigned.
Choose Face-up for raised, shiny top art, or Face-down for a flush 0.6 mm inlay that picks up a textured or holographic build-plate finish.
Use 0.2 mm art height increments to match layer changes in Face-up mode.
The STL ZIP is an advanced fallback; two files for a plate + logo is correct. Import ALL files together without moving or auto-arranging—they are already aligned.
Use flame-rated, code-compliant hardware around mains wiring. A printed cover is not an electrical enclosure.